Kneeboard Surfing USA Community Forum

Puttzy-
Howzit going?
Improving on Daves designs eh?

I have used the vector fins on a couple of stand up boards with good results (Fish type) never tried them on KB's (mine don't have future boxes)
The ones I used (V 1 3/2) look like they were bent inthe middle, made the board much faster - but seemed to stiffen it up also.

I am no fin or board design expert, but I think location of the fins with regards to each other would affect it more than the shape of the inside surface. (If the positioning is correct a flat or concaved fin would function well)

I say try it, especially if you have the fins available - let us know how it goes

Norton

Front set inside foil or flat inside, larger fin , rear set flat inside [ this will make the board turn sharper or crisper. or 80/20 [ softens up you turns a bit] try and get a fin with a larger tip area on both front & back this will give you more drive if your into power turns, smaller tip - quicker release.

Jimputz, good post, interesting thread, curious to hear from others who've tried the different Vector fins. I have a used 6'-2" Flashpoint fish quad with Future Vector II FJC1 460 fins front and Future quad 340s rear. The fins are positioned close together like the Parkes quads ( most of the pics I've seen of other quads Bruce has done the fins are a little further apart), and it is a sweet ride with no sign of turbulence or excessive drag. If I'm understanding the Futures design, the compound/ inside foil will actually REDUCE the separation of the waterflow from the inside face of the fin ( that's what causes turbulence) and instead allows it to roughly match the flow on the outside face, re-joining smoothly, with a minimum amount of closure drag, at the trailing edge of the foil. Should be fine , even better than a regular fin.

Jimputz, I have yet to come across a dud fin from Futures. The people who design them know what they're doing. So does David Parkes.

Fin experimentation is fun and a lot cheaper than buying a new board, although the best outcome usually feels like you bought a new board.

Thanks for the feedback guys.
RMcKnee............love Dave's boards. Have 4 of them. My thruster felt like a brand new board when I put the quad boxes in. Totally different ride of course, and more what I'm accustomed to.
Fossil Man.........thanks for the early morning chuckle. Your comments on my board pics were hilarious. You should do standup. And, you explanation on water flow through the vector foil makes perfect sense. Of course.......why would they develop a high performance template that causes turbulence? I'm going to explore the website a bit more. Thanks again for the info. Made my day.

what are the dims on the parks fin setup . building a new kb and would like to try something different

how far apart

Jimputz how does that measurement work, is it 2 3/8" from centerline of front fin to a line projected foward from the rear fin ? What's the toe-in like on Dave's quads and are they true parallel or is the rear angled slightly more straight ? Been considering different quad positioning theories as I'm adding a trailing set to a used Glen Minami kneeboard ( 6'-0'' x 24" tri-fin swallow ). Only wish the front set were Futures.
Thanks,
Robert

Fossil - need to add Parkes to your list.......